Straight edge to insure alignment. The end user will always have problems making accurate angle cuts if the sawing machine and conveyor aren’t anchored to the floor and level.
Parameter
Type | TYX-330 (Shearing type) |
Cut capacity H*W (mm) | 0 ° ●320 □250*400 |
| +/- 45° ●250 □250*300 | |
| -60° ●180 □250*180 | |
Bandsaw angle (mm) | +45° -60° |
Saw belt size(mm) | 4115*27*0.9 |
Saw belt line speed(m/min) | 40/60/80 cone pulley |
Main generator power(kw) | 2.2 |
Hydraulic generator power(kw) | 0.75 |
Cooling generator power (kw) | 0.04 |
Working clamp style | Hydraulic |
Saw belt tighten style | Hand |
Main transmit structure | Turbine |
Loading style | Roller feeding |
Working table height (mm) | 750 |
Weights of machine (kgs) | 950 |
Packing dimensions(mm) L*W*H | 1800*900*1450 |
OPTIONAL: | |
CHANGED VOLTAGE | |
AUTO CLEAN CHIP | |
BAND SAW BLADE | |
WOODEN CASE | |
Description
Straight edge to insure alignment. The end user will always have problems making accurate angle cuts if the sawing machine and conveyor aren’t anchored to the floor and level. Additionally, check to see that the stock is lying flat on the saw’s table and across the blade path. A loose machine vise has a tendency to lift the stock off the table; and worn pads on the gripping edge of the machine vise can prevent the stock from being held true.The saw blade and cutting fluid are both critical components of any sawing operation. Initially, always inspect the blade prior to cutting. A damaged blade can cause many problems，For instance, a blade with a broken tooth or one that is bent out of line from the tooth set can cause a jagged or out-of-square cut.For making precise angle cuts, the widest blade a machine can handle should be used. Wide blades have fewer tendencies to wander, and they have greater beam strength so they won’t bend or deflect upwards when they cut. If the blade curves, the circumference is greater on the back of the blade than it is on the tooth side. The tooth side becomes wavy and doesn’t make straight cuts. Too heavy of a feed rate can also cause this problem.When cutting tubing or other structurals, you are making an “interrupted cut”. That is the blade teeth start out cutting a solid then move to cutting “air”, then return to cutting a solid. This type of cut can be hard on teeth and it is important to select the proper blade pitch for these applications. It is tempting to specify a coarse pitch blade for making the solid portion of the cut;
Miter cutting L(45°) / R(60°)
Blade tension gauge.
Manual locking vise.
Hydraulic vise.(SAV)
Variable speed by motor inverter.
Digital blade speed display.
Wheel driven chip brush.
Chip collecting drawer.
Pictures
Hot Tags: rotary 60° mitre band saw machine, China, manufacturers, suppliers, factory, wholesale, price, discount, in stock, made in China, Electric Beveling Machine, Rotary 60° Mitre Band Saw Machine, Heating Power Source Pipe Elbow Machine, Horizontal Gantry Metal Band Saw Machine, Construction Automatic Induction Elbow Machine, Construction Long Pipe Bends Making Machine
